Click image to view full size image
HXE-13DT Large-intermediate copper wire drawing machine with annealer, single spooler, coiler
I. Main technical parameters
1.Usage: copper wire drawing and annealing
2.Type:four-axis horizontal
3.Inlet size: 3.0mm-3.5mm
4.Outlet size: 0.8mm-2.8mm
5.Max mechanical speed:1000m/min
6.Dies number:13pcs
7.Dies size:30mm*15mmT or 25mm*10mmT
8.Slip ratio of m/c: 1 -12 die: 19.6% , 13 die: 12.5%
9.Lubrication: half dip+pipe spray
10.Lubrication requirement:150L/ per minute
11.Drawing motor: AC 45KW
12.Spooler motor: AC 11KW
13.Coiler motor: AC 11KW
II.Composition
1.Pay-off shelf
2.HXE-13DT Copper wire drawing machine
3.HXE-TH350 Annealing machine
4.HXE-180 Tension controller
5.HXE-SX500 Single spooler
6.HXE-WF750 Coiler
7.Operation panel
8.Drawing control cabinet
9.Annealing control cabinet
10.Voltage Transformer
III.HXE-13DT Copper wire drawing machine
1.A3 welded by steel plate
2.Transmission: by gears and triangle belt.
3.Capstans:two layers and unfilled, total capstans number:5pcs, the four capstans are same and can be internal replaced,the final capstan is special.Tungsten carbide on the surface of capstans
4.Dies size:30mm×15mmTor /25mm×10mmT.The final dies size:25mm×10mmT.
5.Gears lubrication:Half Dip in + Pipe Spraying
6.Main motor:45KW, with 45KW frequency Inverter drive.
7.Drawing slip ratio: 19.6%+12.5%
8.Max drawing capstan diameter: O.D. 280mm
9.Fix speed capstan diameter: O.D. 280mm
10.Magnet break
IV.HXE-TH350 Annealing machine
1.Structure:Q235, welded
2.Usage: annealing copper, connect with wire drawing machine.
3.Annealing size: 0.8mm-2.8mm
4.Annealing speed: 300-1000m/min
5.Annealing voltage/max: 60V
6.Annealing current/max: 3000A
7.Annealing power: 180KVA
8.Annealing type: D.C three section
9.Power source: customized
10.Annealing voltage control: auto tracking drawing speed
11.Steam capacity:18kg/h, 0.4Mpa
12.Coolant liquid capacity:12-18m3/h,0.2-0.25Mpa
13.Compressed air capacity:20-30m3/h,0.5-0.6Mpa
14.Deflection detection tension controller
15.Tension: pneumatic swing arm
16.Accuracy: 1-20KG, auto adjust the tension
17.Deflection check: precision resistance 1 KΩ.
18.Transmission: By flat belt that connect to drawing machine
19.Synchronous speed of Drawing and Annealing, no wire break
20.With Annealing door to cover
21.Two food switches
22.Six valves
V.HXE-WS500 Single spooler (Pneumatic)
1.Applicable wire diameter: 0.8mm-2.8mm
2.Max. line speed: 25m/s, adjustable
3.Loop size: 500mm
4.Max, loading capacity: 200 KG/Max.
5.Wire storage: Not available
6.Spool motor: AC11KW
7.Motor power of line arrangement: 90W
8.Brake:Disc brake
9.Safety door
VI. HXE-WF750 Coiler
VII.Main components list
| No. | Specs | Origin | Brand |
| 1 | Main Inverter | Shenzhen | Inovance |
| 2 | Spooler Inverter | Shenzhen | Inovance |
| 3 | Coiler Inverter | Shenzhen | Inovance |
| 4 | Main motor | Anhui | WN |
| 5 | Spooler motor | Anhui | WN |
| 6 | Coiler motor | Anhui | WN |
| 7 | Proximity switch | Germany | P+F |
| 8 | Electric cabinet | Suzhou | HXE |
| 9 | Precision resistance | Shanghai | Military enterprises |
| 10 | Bearing | Japan | NSK |
| 11 | Capstan | Guangdong | Chuangkang |
| 12 | Low voltage equipment | France | Schneider |
| 13 | Instrument | Shenzhen | Inovance |
| 14 | Frame | Suzhou | HXE |